| |
| 1. I get no image displayed at all.
What¡¯s wrong? |
Make sure the USB cable is correctly connected
to your PC and PC power is on.
Check the monitor cable is connected
if the LED indicator signals red. (800x600 resolution / 60 Hz
screen output) |
|
| |
| 2. The screen leans to the left
(or right). Is there something wrong with my i-visor? |
You don¡¯t need to worry about this.
This can be corrected simply by pressing the left or the right
button to adjust the screen. |
|
| |
| 3. Why does the screen flicker or
vibrate? |
If you see 2D images in 3D setting, flickering
happens.
When LED indicator flickers, press the function button to set
2D
and you will have the green LED indicator signal.
(Depending on the condition of the graphic card you have, a
little flickering may occur.)
If the power supplied is weak or insufficient, flickering may
happen. (The appropriate power supply is 5VDC.) |
|
| |
| 4. Why does the power turn off during
operation? |
If there is no operation for two and a half
hours (150 minutes), it happens.
The screen will be automatically turned off to protect your
eyesight and the unit itself.
If the screen saver appears on your PC, the system turns to
standby mode. |
|
| |
| 5. Why do I get no sound at all? |
Make sure you connected the headphone correctly
as instructed.
Check sound setting on your PC. |
|
What’s
i-Visor FX601
